You searched for: "thread" | 67 total matches | |
![]() |
28 months ago by Paul Townlian | Re: Sling swivel studs loosening
Excellent! Thank you for the response. I will be adding the new addition to my reading list, I guess I missed its release. After reading that ill make a final judgement on the fate of my HS precision stock. One final clarification, and I believe this issue will be all stitched up... So these modern studs/bolt when loose are functioning as intended? If I understand correctly, the modern studs can in fact be backed out completely like they can on traditional wood stocks. I see this when I rotate t.. Forum Index > Rifles general discussion > Sling swivel studs loosening |
![]() |
28 months ago by Nathan Foster | Re: Sling swivel studs loosening
Hi Paul, regarding the rifles you have described, the modern sling studs are machine screws (i.e. bolts), not tapered wood screws. Likely you became used to tight fitting wood screws years ago. The modern screw arrangement is designed to remain loose. They are fitted to an internal streel or brass thread which provides sufficient strength to keep the bolts in place but allows them to rotate to whatever angle the sling is pulled to. Loctite won't work as sling tension simply pulls the bolt undone.. Forum Index > Rifles general discussion > Sling swivel studs loosening |
![]() |
29 months ago by Nathan Foster | Re: Remington 721 walker trigger DIY safety tips
Hi Paul, regarding lighter fluid residue, the weather here in NZ is too corrosive for this to be adequate on its own. Something a bit heavier is required at least for our conditions. For the threads, try nail polish on the outer of the threads in blobs, rather than thread locker on the internal threads. A bit of a dichotomy, the less people are into guns the lighter the trigger needs to be in order for them to shoot accurately. But of course, one must have safe habits in order to use such a trig.. Forum Index > Rifles general discussion > Remington 721 walker trigger DIY safety tips |
![]() |
33 months ago by Nathan Foster | Re: Downsides to Threaded Muzzles
Those who have my books will know that I have been warning against narrow muzzle threading vs potential muzzle swelling since 2012. Many would not listen, nor would they take note of my warnings regarding ultra light barrels or ultra light fluted barrels. I even had a phone call from a suppressor manufacturer, complaining that I was off base. The NZDF also made contact with me, asking me to brief them on findings, though they at least took the subject somewhat more seriously than others. On top .. Forum Index > Rifles general discussion > Downsides to Threaded Muzzles |
![]() |
33 months ago by Ryan Cameron | Re: Downsides to Threaded Muzzles
It seems if muzzle devices are used 3/4 x 28 seems to be the minimum to maintain consistent bore diameter. I recently was wondering about the downsides of muzzle brakes as my new rifle came with Brownings HAWG brake. It does reduce recoil but the 26" barrel is so heavy, I'm not sure there was much recoil to begin with. It does look cool but I couldn't care less. I guess I'll find out in time if this will affect practical accuracy. https://bulletin.accurateshooter.com/2015/04/muzzle-threading-don.. Forum Index > Rifles general discussion > Downsides to Threaded Muzzles |
![]() |
38 months ago by Joshua Mayfield | Re: Qualified Opinion & Experience with RemAge / Shilen Alternut Barrels
Ricardo, I've been studying some of the same merchandise and services lately. Without bogging down in all the details, I ordered a 26" stainless barrel from McGowan today. It will be threaded for a large shank Savage action and will eventually be chambered for .300 Win Mag with the Foster-Manson reamer. This is my first time down the custom barrel road. I'll be interested to see how your orders turn out. May we both be pleasantly impressed... good luck. Forum Index > Rifles general discussion > Qualified Opinion & Experience with RemAge / Shilen Alternut Barrels |
![]() |
38 months ago by Nathan Foster | Re: Qualified Opinion & Experience with RemAge / Shilen Alternut Barrels
Hi Ricardo, you might as well just give it a try. The main concern is the difference in thread dimensions. If the thread is very loose, it will be up to the lock nut to keep everything secure with regards to vibrations and how these affect accuracy. Experience leads me to suggest that if the threads are a bit loose with this type of system, bedding ahead of the barrel nut by one or two inches will normally tame down vibrational (particularly double grouping) issues. There are other factors that .. Forum Index > Rifles general discussion > Qualified Opinion & Experience with RemAge / Shilen Alternut Barrels |
![]() |
43 months ago by David Landwehr | Re: Downsides to Threaded Muzzles
The reduced dia at the muzzle it not so thin that it would cause swelling, even on sporter barrels. This is not a concern. I'm also of the belief they are not necessary but I do have a rifke with one because it came with it. With modern manufacturing a thread and cap are very cheap to add at the manufacturing stage but expensive to add later. For the few people who want it, its a cheap solution and I don't see it detracting from those who don't want it. Forum Index > Rifles general discussion > Downsides to Threaded Muzzles |
![]() |
43 months ago by Mike Davis | Re: Downsides to Threaded Muzzles
well for around $60 you could simply get rifle recrowned removing threaded bit...loosing why??? 10-15mm over all length.. Im about to have bull barrel done with a 18-1 thread...which I assume is 18mm in diameter...so will have plenty heaps meat around a 5.5mm hole.AND leaving original crown alone. all my other rifles have std thread 20 tpi 1/2" I believe it is....never had an issue. Forum Index > Rifles general discussion > Downsides to Threaded Muzzles |
![]() |
43 months ago by Ryan Nafe | Re: Downsides to Threaded Muzzles
Yeah guys, the thin steel at the muzzle is where I get concerned. If the bore is pretty small diameter (say 7mm or under) and the threads are relatively large, like 5/8-24, there’s probably still enough steel there to not create much of an issue. But in cases where the steel remaining at the muzzle is not particularly thick, I just wonder if that’s a potential problem. I can’t see it being a net benefit if you’re not gonna use it by putting on a brake or a can, but I’m not sure if that necessari.. Forum Index > Rifles general discussion > Downsides to Threaded Muzzles |
![]() |
43 months ago by Lane Salvato | Re: Downsides to Threaded Muzzles
Ben, I hadn't considered that notion. Sporter barrel, etc. could be a major issue. My only threaded barrel is on a Remington 700 5R which is a relatively thick barrel. Threading isn't going to do anything to that but I could see a concern if you were using it on a barrel that was already thin, and then you take out more metal at the very end. Forum Index > Rifles general discussion > Downsides to Threaded Muzzles |
![]() |
43 months ago by Ben Law | Re: Downsides to Threaded Muzzles
it seems like most howa's come with threaded muzzles now days. no, im not a fan really. yes great if you want to screw something on there but i dont. a lot seem to have a small thread compared to the diameter of the barrel, i hear this can result in swelling at the muzzle and loss of accuracy over time. Forum Index > Rifles general discussion > Downsides to Threaded Muzzles |
![]() |
43 months ago by Lane Salvato | Re: Downsides to Threaded Muzzles
My experience with one rifle with a 5/8” thread has been fine. I don’t remove it except to clean it. I don’t own a muzzle break but the rifle I really wanted just came with it. I really think it’s market driven unfortunately but I wouldn’t let it stop me from purchasing an otherwise great rifle because of it. You can find them without though if that’s your preference. I agree that they are largely unnecessary. I love my 338 Win. Mag. It’s muzzle brake free. I’m way older than Nathan but I can ho.. Forum Index > Rifles general discussion > Downsides to Threaded Muzzles |
![]() |
43 months ago by Ryan Nafe | Re: Downsides to Threaded Muzzles
One last thing, this is honestly just a bit of venting and a check to see if anyone else has the same feeling going on: I’m getting pretty frustrated with manufacturers putting out otherwise fantastic rifles but putting brakes on them, even mid-weight rifles in very mild cartridges like 6.5 crapmore and .308. It’s a complete waste of time, materials, and the subsequent cost to the consumer. I mean really, under what conditions would anyone think it worthwhile to put an extremely loud spiral-port.. Forum Index > Rifles general discussion > Downsides to Threaded Muzzles |
![]() |
50 months ago by Christopher Howse | Re: Recoil fad
I think the comparison of but plates on Walnut stocks and recoilbpads on Synthetic stocks of comparable production rifles is because the lighter synthetic s do recoil more for the came cartridge. I think there is a belief the timber also absorbs recoil to a degree. I believe that somewhere here a few years ago Nathan wrote something about soft and squishy recoil pads on rifles. To the effect of saying they are not on military rifles maybe and they don't necessarily make you a better shooter. It'.. Forum Index > Rifles general discussion > Recoil fad |
![]() |
50 months ago by Vince | Re: Recoil fad
Hi Scott, With the recoil pads, as you say it's probably down to aesthetics, no-one wants to pay for a high grade walnut stock then shorten it to add an ugly pad. With the cheaper rifles which probably make up the bulk of sales and profits, why not put them on. Whether they work with felt recoil reduction, or customers simply think they do either way it's a win for the seller. Same thing with the threaded muzzles on 223's etc, if your customers think they need it then make it a selling point and.. Forum Index > Rifles general discussion > Recoil fad |
![]() |
50 months ago by Scott Struif | Re: Recoil fad
It seems like a threaded muzzle would be a special-order item that you’d pay extra for. But many production rifles from the cheapest (TC Compass), to higher-end (Sako 85) come threaded, no matter what the caliber. I can see Vince’s point of using a silencer on a brush gun. You need to be able to hear game, and may not have time to deploy hearing protection. But why thread any gun with less recoil than a 300WM? Forum Index > Rifles general discussion > Recoil fad |
![]() |
50 months ago by Warwick Marflitt | Re: Recoil fad
Come on Scott! The Thread protectors there to protect the thread. Your shoe laces are there to stop ya boots falling off . A Muzzle break should have strings not threads....... To Hook behind the ears and muffle the low Caliber turds...... It's a broke conspiracy that a .22LR needs a break or a brake ..... Tanks and Artillery need em four shore.....A 223, 7.5x55, 44-40wcf Nah!!! Silencers yes a valuable tool and asset......... Then again? Remember "NEVER ARGUE WITH A FOOL, THEY'LL DRAG YOU DOWN .. Forum Index > Rifles general discussion > Recoil fad |
![]() |
50 months ago by Scott Struif | Re: Recoil fad
Thanks Vince. Your observations and the video were most informative. My curiosity about recoil pads was piqued recently looking at photos of the current offerings from Ruger. Their high-end Hawkeye wood-stocked models have a thin rubber butt plate, whereas all their synthetic-stocked models feature a thick recoil pad with the appearance of “venting” reminiscent of the Pachmayr pads of yore. My guess is it’s all driven by cosmetics. Even if they had evidence the thick recoil pads helped reduce re.. Forum Index > Rifles general discussion > Recoil fad |
![]() |
50 months ago by Vince | Re: Recoil fad
Hi Scott, Interesting question, I was reading something the other day about curved gun stock butts in the early american days to aid shooting from horseback. I find rubber recoil pads useful, largely becasue they don't slide around. I guess the compression must help in at least a minor way to reduce recoil but from what I understand stock design and shape is far more important. A mate of mine has a 7mm Rem Mag in a Tikka Hunter Wood and Stainless model, theoretically along with the 30.06 on the .. Forum Index > Rifles general discussion > Recoil fad |
![]() |
65 months ago by Robert Spencer | Re: Lithgow la101 22lr
I torque mine at 15 in lbs. Maybe I can also help with improving your rifle accuracy. I've tried several 22 cal bullets including Lapua X-ACT and Midas, Eley Target/Tenex / Match. My la101 Shots tightest group with Eley Match. Lapua X-ACT and Eley Tenex close second. My trigger is 14oz, Rifle is Glass bedded, with free floating barrel. Installed Harrells Precision 1/2X24 threaded barrel tuner, my rifle shoots best on 76 setting. also has Vortex Viper PST 5-25X50 scope, with night force rings. or.. Forum Index > Rifles general discussion > Lithgow la101 22lr |
![]() |
69 months ago by mark | Re: Muzzle thread issues
Possible issues I can think of, stock over torque by Smith or lathe centre been put in muzzle for threading and not recrowned. But no damage visible by eye. Or am I too anal and just get on with working up reloads? Forum Index > Rifles general discussion > Muzzle thread issues |
![]() |
71 months ago by Paul S | Re: Bedding Vanguard Synthetic stock
Sorry to butt into this thread, but I am new to this and I think my question is relevant. I too have a Vanguard in .243 (which I love) and I would like to improve its stock/accuracy. Question: Can I free float the stock's fore-end? If so, do I clearance all along the barrel, including the fore-end stock and under barrel support? I have heard the Vanguard needs this support from the stock. Is that true? Thanks, Paul. Forum Index > Rifles general discussion > Bedding Vanguard Synthetic stock |
![]() |
71 months ago by Paul Leverman | Re: Interesting bedding hisory thread
Good article. Forum Index > Rifles general discussion > Interesting bedding hisory thread |
![]() |
78 months ago by Thomas Kitchen | Re: .22 LR Remington 597
just for warwick reply the henry's 22 levers have a good rep. Mark i have been using cci suppressor rounds lately i can't rate them enough, they kill really well. the 22lr is an odd design in theory it shouldn't be as popular as it is, its heeled projectile (only centrefire i can think of that a heeled design is 310 cadet) and no freebore once again only one that comes to mind is the 22 hornet. what's interesting is how tight the saami spec match chamber is compared to the sporting spec one. mus.. Forum Index > Rifles general discussion > .22 LR Remington 597 |