cart SHOPPING CART You have 0 items
SELECT CURRENCY

Discussion Forums

Search forums
Forum Index > Search Results
You searched for: "thread" 723 total matches
Practical Guides Read! Re: 58 months ago by Ricardo Laborin Practical Guides Read! Re: "Upgrade" from 300 WSM to 7MM Rem Mag??

Reposted from the original thread.... Gentlemen, Happy New Year to you all. Two practical guides are now officially read - the LRH Rifles & LRH Cartridges. I'm blown away by the quality of the info and feel like I'm right there in a fireside chat with Nathan. My takeaways as follow, please critique at will!! General Conditions: - Game weight - 90% 250lb or below (occasional Elk or Red Stag or Plains Game on the mix). - MAX desired range - 650 yards. - Access to reloading - spotty but doable. - H..

Forum Index > Rifles general discussion> Practical Guides Read! Re: "Upgrade" from 300 WSM to 7MM Rem Mag??
Re: To suppress or not suppress 59 months ago by Mike Davis Re: To suppress or not suppress

I will watch this thread with interest..... now MY take on them is this good for my old ears good for my dogs ears easier on recoil so good if son needs to shoot game seem less disturbed "just around the corner" my good enough accuracy has stayed same or slightly better probably due to shorter stiffer barrel+ less reaction to recoil/noise I have them on all mine now and love not getting ear ringing after a day out. YES they add weight..but if you put them in back pack till you reach open tops th..

Forum Index > Rifles general discussion > To suppress or not suppress
To suppress or not suppress 59 months ago by Ben Grady To suppress or not suppress

Hi Guys I have another question while my rifle is at my gun smiths being worked on. I already have a 25 cal suppressor for another rifle. So do I get my gunsmith to thread the barrel while he is working on my rifle, I have a spare rear suppressor bush for him to size to the barrel. I may or may not use the suppressor on the rifle, but some times there are neighbours and stock close by to where I shoot and it has to be better for my ears. My question is do you think threading the barrel will be d..

Forum Index > Rifles general discussion> To suppress or not suppress
Re: stock selection 59 months ago by Mike Neeson Re: stock selection

I can comfortably shoot out to 550yds - 500m without any fuss. Haven't hunted at this range but can bang the steel gong at the shooting range without too much effort. For hunting, use 168 AMAX for long shots and the 165 SST for closer stuff. There is a thread on load development for the SPS in 308W on this forum if you look for it.

Forum Index > Rifles general discussion > stock selection
Varimax QC 59 months ago by chris murphy Varimax QC

Selling my varimax muzzle brake as I've started playing with my own designs. It's bored for 7mm with m14x1 thread. The varimax brakes can have the braking function turned off. See muzzlebrakes.co.nz.

Forum Index > Classifieds, for sale section> Varimax QC
Re: Sightron S3 6-24x50 FFP new turret caps 59 months ago by Nathan Foster Re: Sightron S3 6-24x50 FFP new turret caps

Hi Jason, I have not had this problem but perhaps it is because I have spent a lot of time mucking around with turret scopes. It is possible that the torx screw was siomply too firm when you went to undo it, causing initial problems. I hold the turret and the scope body between my fingers. I only nip up the screws. There is no need for heavy tightening and indeed, I have seen threads ruined on various scopes from such practices. I have never had a turret slip after being nipped up. So again, no ..

Forum Index > Optics > Sightron S3 6-24x50 FFP new turret caps
Re-loading question 59 months ago by Ben Grady Re-loading question

Hi guys I am still waiting for Nathans re-loading book to arrive in my mailbox so I have question that wasn't really answered before in one of my threads. When I first load a new projectile for a given cartridge, I sort out the OAL with one of the given methods (hornady gauge seems to work well). I then seat the projectile 1mm off the lands and start loading in .5 gr increments from half way between min and max (book data) and work my way up (checking for pressure signs as I go, once at the rang..

Forum Index > Rifles general discussion> Re-loading question
Re: Heavy Barrel or not? 59 months ago by Nathan Foster Re: Heavy Barrel or not?

Sounds good Glen. Yes, just work through it step by step. Hi Bryan. The featherweights are OK but I have found two weaknesses which go hand in hand with the 600 yard Elk slayer thread and the Tikka comments. 1. Rifle shakes if you have been climbing, then have to drop and take a hurried 300 yard shot. 2. Recoil can be quite fearsome in .300 Win Mag. I would not want to shoot a 208gr bullet above 2600fps in this rifle. It would also take a good deal of practice. It can be done if the hunter reall..

Forum Index > Rifles general discussion > Heavy Barrel or not?
Re: New Barrel Preparation Questions 60 months ago by Ben Grady Re: New Barrel Preparation Questions

Hi guys. Well my new barrel has arrived chambered in 25 06 rem. It is 26" stainless steel with a 9.5 twist. It has a heap or meat at the knox and tapers down to about 16mm at the muzzle. It is going to be a fairly heavy set up looking at the barrel on it's own. I have ordered a laminated stock from boyds as it is touch and go if there will be any wood left, next to the knox once the barrel is inletted being a heavier contour (with my exiting stock). I've decided to hold off threading for a suppr..

Forum Index > Rifles general discussion > New Barrel Preparation Questions
Re: Fast barrel? 60 months ago by Randal Graham Re: Fast barrel?

Jared, posted on the .35 thread, I'll put the lapping link here too... http://youtu.be/ml-9oLLKYsM Is the rifle shooting consistant groups? Even at 2"... Are they consistant groups or all over the place and vary from small groups to large randomly? Very very generally speaking, large but consistant groups are barrel finish related, very random all-over-the-place groups usually end up being throat/chamber issues or a bad crown. Also, if you shoot a long string, like 5 groups of 5 rounds, and the ..

Forum Index > Rifles general discussion > Fast barrel?
Re: Fast barrel? 60 months ago by Randal Graham Re: Fast barrel?

Saw your post on another thread about fire lapping this barrel... Have you bore scoped this barrel yet Jared? I always hated chasing problems by throwing stuff at a gun waiting to see what might work, can go around in circles for a long time before issues get sorted out. I'd consider having a proper look at the bore first off to see where the barrel is at for sure. If it's tool chatter, crappy lap job, pits, burrs, crappy chamber cut or throat, you'll see it right away. Firelapping takes a lot o..

Forum Index > Rifles general discussion > Fast barrel?
Re: Warming up to the .35's 60 months ago by Randal Graham Re: Warming up to the .35's

Hi Bob! Yes, saw your posts in the 9.3/.35 whelen thread, found them quite enlightening. Sounds like a beautiful rifle as well, always been quite fond of Sako rifles, I owned a Sako carbine for a short time and it was one of the nicest guns I've owned, but was not in a caliber I could easily load for...and an offer came along. How I ended up with the damn BLR actually, and an auto-5 to boot. Wow, 225 at 2600+ , that has gotta be a deer hammer. Hmm, that would hit pretty hard a fair ways out I'd ..

Forum Index > Rifles general discussion > Warming up to the .35's
Re: Warming up to the .35's 60 months ago by Nathan Foster Re: Warming up to the .35's

Hi Randal, I think to some extent this is a personal choice. To my way of thinking, a bolt action rifle is a simple and effective proposition. The bedding, trigger and bore can be worked on with ease. The ejection port can be cleared easily. The comb of the stock on a bolt action can be made to have better alignment. So on the one hand, while a lever can be faster to cycle, the bolt action will not recoil in the same manner and recovery from recoil is very fast. Such a rifle can be made both por..

Forum Index > Rifles general discussion > Warming up to the .35's
Warming up to the .35's 60 months ago by Randal Graham Warming up to the .35's

Nathan suggested I have a look at the .35 whelen as a contender for my next hunting rifle, after looking at both the .35 whelen and .358 winchester in great detail I must say I am feeling the pull towards them. One stubling block is lack of rifles available in either. Although I'm not opposed to a build in any case. What I have come to is this; the Browning BLR is a rifle I have many many years of expirience with, and it is available in .358 winchester. In this caliber it has a 20 inch barrel on..

Forum Index > Rifles general discussion> Warming up to the .35's
Re: rifle wont shoot less than 1 1/4 inch 60 months ago by Mike Neeson Re: rifle wont shoot less than 1 1/4 inch

Hi Jaspur, start here. http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/17/thread/4765.html [http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/17/thread/4765.html] In this thread there is another link to more detailed info on working up a load. Good luck.

Forum Index > Rifles general discussion > rifle wont shoot less than 1 1/4 inch
Re: rifle wont shoot less than 1 1/4 inch 60 months ago by Nathan Foster Re: rifle wont shoot less than 1 1/4 inch

Hi Jaspur, this may simply be a case of your COAL being wrong. You are cuurently set too long and concentricty will be very poor. Set COAL to 71mm, then rework up loads. See COAL article in the rifle accuracy section of this site for more info as to why your COAL was wrong at 1 thou jump in the .308. There should be another thread here somewhere close which covers the same info and also powder charges. Bedding may need addressing, plus other factors as described in my last book (Accurizing). Sti..

Forum Index > Rifles general discussion > rifle wont shoot less than 1 1/4 inch
Re: Weatherby Vanguard 300WSM 60 months ago by Andrew Dobbin Re: Weatherby Vanguard 300WSM

Finally got time to post an update for those interested. I finished bedding about 2 weeks ago, came out real nice with just a couple of cosmetic cracks at the tang. I ended up putting a Timney trigger in because when I adjusted the factory trigger to 1.5lbs the trigger weight screw was only engaging about 1.5 threads, and this just didn't feel safe to me. Bonus that the Timney has a 3 position saftey opposed to the original 2 on the factory. [http://s40.photobucket.com/user/nakidobbo/media/phot..

Forum Index > Rifles general discussion > Weatherby Vanguard 300WSM
Re: Open sights 60 months ago by Randal Graham Re: Open sights

Browsing through the forum and came across this thread, thought I'd jump in as iron sight hunting has been my passion since the beginning of my hunting some 36 years now. I have had glassed rifles, particularly for coyotes, but most often use iron. My first great setup was on a BLR in .30-06, front sight was the factory post with a hood added and what I came up with was a small platinum shotgun bead. On the rear the first really good one was a lyman #90 .22 target sight, it has finger adjustable..

Forum Index > Rifles general discussion > Open sights
Re: Tikka T3 build/bedding 60 months ago by Paul Horwath Re: Tikka T3 build/bedding

Here's what I've done to prepare the pillars and the recoil lug for bedding my Tikka T3 action thus far. I've screwed the pillars to the action using a tapered head screw. On the threads of the tapered screw, I wrapped the threads with electrical tape to a diameter that fit the inner ID of the aluminum pillars. The tapered head centers the pillar at the top, and the electrical tap centers the pillar where it mates to the face of the action. Then I placed a tall socket on the top of the pillar th..

Forum Index > Rifles general discussion > Tikka T3 build/bedding
Re: Tikka T3 build/bedding 60 months ago by Paul Horwath Re: Tikka T3 build/bedding

Quote:Hi Paul If you look at Bens picture above you can see the pillars protruding from the stock that will fit up flush against the washers located in the plastic trigger guard. I have done similar is the Boyd's stock but have used a machined feral that fits into the plastic guard then bedded them into the stock, l also machined flat seat rather than tapered action screws. The problem lies with the original tapered screws pulling into and possibly through the unsupported thin washers in the gua..

Forum Index > Rifles general discussion > Tikka T3 build/bedding
Re: Stock Recommendation 60 months ago by thomas kitchen Re: Stock Recommendation

hi scott this subject comes up a lot its worth searching the old threads for a read. hope you find something that suits you (and your budget). and be sure to post a picture of what you decide on.

Forum Index > Rifles general discussion > Stock Recommendation
Re: Unburnt powder in the moderator 61 months ago by chris murphy Re: Unburnt powder in the moderator

Welcome GB it is simply that the barrel is to short for the amount of powder in the case to fully burn. Make sure he cleans it out regularly or he might end up with a pipe bomb threaded on his barrel

Forum Index > Rifles general discussion > Unburnt powder in the moderator
Re: Tikka T3 build/bedding 61 months ago by G B Re: Tikka T3 build/bedding

Good morning gentlemen. I have been following several threads on here with interest and a comment Nathan made above has prompted me to join up and - where possible - join in. In the comment above Nathan refers to a discussion about double set triggers, now as this is a small obsession of mine I would be very grateful if someone could point me to that discussion. Meanwhile I will be considering further some of the discussion surrounding stock bedding. My interests are vintage and out of productio..

Forum Index > Rifles general discussion > Tikka T3 build/bedding
Re: Remington 700 Sendero Barrel, Chambered in 7mm RM and threaded - 200rds use 61 months ago by Adrian Van Haeren Re: Remington 700 Sendero Barrel, Chambered in 7mm RM and threaded - 200rds use

Id bee keen also

Forum Index > Classifieds, for sale section > Remington 700 Sendero Barrel, Chambered in 7mm RM and threaded - 200rds use
Re: Brass preparation for LRHunting (and DIES selection) 61 months ago by Alvaro Piqueras Alonso-Lamberti Re: Brass preparation for LRHunting (and DIES selection)

Hi all; Old thread, but iīm going slow, step by step. Someone have noticed I have had many problems with my sendero. Things start to go well, but you canīt relax too much! The other day i was reloading some rounds. During F-L process, i get a bit distracted, and a case mouth traps the decapping needle, bending the threaded rod (hornady die: it has a threaded rod where you screw the expander and the decapping needle). I just raise the handle and start again, after checking the case mouth. I didnī..

Forum Index > Precision long range hunting and shooting > Brass preparation for LRHunting (and DIES selection)

ABOUT US

We are a small, family run business, based out of Taranaki, New Zealand, who specialize in cartridge research and testing, and rifle accurizing.

store