cart SHOPPING CART You have 0 items
SELECT CURRENCY

Discussion Forums

Search forums
Forum Index > Search Results
You searched for: "thread" 723 total matches
Re: Where to get Aluminium oxide powder for lapping lugs ?? 48 months ago by Thomas Kitchen Re: Where to get Aluminium oxide powder for lapping lugs ??

hi chris this may be helpful http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/17/thread/6774.html

Forum Index > Equipment > Where to get Aluminium oxide powder for lapping lugs ??
So where are the 270 projectiles ??? 48 months ago by Chris Bayley So where are the 270 projectiles ???

With respect to the Hornady ELD thread and my previous observation that Hornady don't do the much vaunted A-MAX in 270 I am left wondering why ? Is the 270 a bit of an "L&P" calibre ? ie. world famous in New Zealand only ? I accept that 30cal and 7mm would be the most popular here but I thought 270 would edge out 6.5mm but perhaps sales lag those of the 6.5 internationally ?? So then: best long range performer for 270 ? (I'm currently loading SSTs) Cheers, Chris

Forum Index > Precision long range hunting and shooting> So where are the 270 projectiles ???
Re: Tikka T3 Pillar question 49 months ago by Chris Bayley Re: Tikka T3 Pillar question

My lug was basically corroded in place and appeared ready to resist all pulling attempts: [http://s292.photobucket.com/user/ChrisBayleyNZ/media/DEBD5783-6558-4965-B7F1-5F5D50A1C9B5_zpszvfe5sdb.jpg.html] I sprayed on some WD40 and left the stock in the light sun to warm/expand and let the WD40 work in. After a couple of hours and a single tug with some pipe grips it came away first time. It's looking a bit beaten up tho: [http://s292.photobucket.com/user/ChrisBayleyNZ/media/C6B7CC37-4926-46AC-8..

Forum Index > Precision long range hunting and shooting > Tikka T3 Pillar question
Re: Browning BLR 49 months ago by Mike Davis Re: Browning BLR

hmmm yes trigger is "interesting" long first stage but nice from there, probably no more than 3lb. hot day with a small breeze put up some a4 targets and tried it out #1 I dont like non suppressed #2 she doesnt like my hastily chucked together load with 125grn seirra 30/30 pills and 50 grns win powder =4" #3 factory fed 150grn =2 under inch then one out 3" #4 factory 180grn winchester= 2 nearly touching and 3rd at just over inch,whole group nearly 5" low #5 I still flinch like a fool at times, c..

Forum Index > Rifles general discussion > Browning BLR
Re: The final book in the series - done 49 months ago by Alvaro Piqueras Alonso-Lamberti Re: The final book in the series - done

Thanks for the whole Long Range serie, Nathan!! You can sleep, sit down, go for a hunt of have a beer... Time for you and yours! But donīt forget to look back to the thread and realize that people here are talking more of a person than a book... Weel done mate! Cheers

Forum Index > Precision long range hunting and shooting > The final book in the series - done
Re: Hornady new 49 months ago by Nathan Foster Re: Hornady new "big thing" announcement...

Nate, Nath or Nathan, its all the same. I post as Kiwi Nate when helping on longrangehunting.com. Have posted bugger all these last couple of years but still get PM's regarding the 80 page 7mm-300 thread. I agree with what you are saying. Mike Neeson on the other thread has just learned a new saying regarding current marketing. The 175gr bullet will hopefully go well at around 3150fps in the 7mm Practical. The 9 twist will be ideal at these speeds without ripping things up. The BC of .660 should..

Forum Index > Precision long range hunting and shooting > Hornady ELD and ELD-X
Re: Ruger M77 Hawkeye All Weather .270win 49 months ago by Brett Machen Re: Ruger M77 Hawkeye All Weather .270win

Thanks guys Great advice. I am definitely going to accurize this rifle. I'll start with Paul's advice and work on load development. Then through Nathan's books I'll study the craft of accurizing. I will keep this thread posted on my journey. Bye

Forum Index > Rifles general discussion > Ruger M77 Hawkeye All Weather .270win
Re: browning blr takedown 49 months ago by Thomas Kitchen Re: browning blr takedown

just watched video on youtube mike https://www.youtube.com/watch?v=cUXJ4icGjtI looks more like he done it just to prove he can, i believe its the same guy that built chris mckoy's rifle http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/18/thread/7587.html i was thinking the same thing about those baikel they are nice and handy and short without having to worry about action length, my mates got one with a basic 6x40 scope on it, still has bugger all rounds through it but shoot p..

Forum Index > Rifles general discussion > browning blr takedown
Re: Where to next ?? 49 months ago by Nathan Foster Re: Where to next ??

Hmm, a tough call because soft loads won't allow you to really practice with the rifle as would be in the field when hunting with full power loads. This could in turn lead to misses or wounds. But the soft loads will allow you to get used to the rifle. This final animal of a book should help you with recoil issues. I would rather you read this bore making any rifle alterations. If only the barrels were just a touch thicker, it would make fitting an M14 thread viable and make for a much different..

Forum Index > Precision long range hunting and shooting > Where to next ??
Re: semi auto .22 49 months ago by Thomas Kitchen Re: semi auto .22

hi jason. have heard that before not sure if its true or not, might be time to get out the chrono and see? and by how much can't say much as i don't own one but i have been looking at the ruger american rimfires with interest, i know timney now offers after market triggers, if your not fan of the blade type (apparently you can take spring out of standard trigger if you want to go even lighter) plus you can use the 25 round ruger mags on an a cat licence. think they come threaded and reloaders ha..

Forum Index > Rifles general discussion > semi auto .22
Re: remingon 700 sps or adl 49 months ago by Thomas Kitchen Re: remingon 700 sps or adl

hi Trevor i suggest you look at all the different stocks you may want and check which models they are available in. the remington stocks seem to be of reasonable shape so you may want to look at stabilizing and bedding also. most rifles are covered in Nathans book, check out this link once again martin has done a very helpful thread for everyone to have a look at http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/17/thread/6584.html

Forum Index > Rifles general discussion > remingon 700 sps or adl
Re: Tikka T3 recoil lug relief 49 months ago by Chris Bayley Re: Tikka T3 recoil lug relief

Quote:You use one layer of tape on top and one layer on the rear then put thin smear of glue on tape and set into action trim off tape that can be seen sticking out from action. This is lowered into compound like that and when broken out the lug is left in the stock. Hope this makes sense Yes I believe I see it now after having a look at the other thread. I read the instructions as relieving the entire back of the lug which made no sense to me but relieving the rear interface with the action doe..

Forum Index > Precision long range hunting and shooting > Tikka T3 recoil lug relief
Re: Where to next ?? 49 months ago by Chris Bayley Re: Where to next ??

Quote:well call me a wooster burger if you like but I would put another suppressor on new rifle straight away. 100+ rounds of std .270 on paper would have me plurry near black and blue and flinching like a gibbering idiot ...... nip that flinch in the bud BEFORE it gets ingrained. if you want to reduce recoil but keep hot load that will do the bizo look hard at the likes of a 110grn TSX or even a 130grn the difference in recoil IS alot. Yeah, I like suppressors and had the 308 threaded and fitte..

Forum Index > Precision long range hunting and shooting > Where to next ??
Re: Which rifle is it? 49 months ago by Thomas Kitchen Re: Which rifle is it?

this may be of some interest to you jonathan http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/17/thread/7230.html i got couple lee enfield but slowly working on a savage no4 mk1* theres a difference mk1 and a mk1* main difference being a slot on the bolt track. think savage and longbranch produced the mk1* and the english made the mk1. hardest thing to find here is full wood stocks as a lot were cut down to sporters. that youtube clip is one of my favourite ones.

Forum Index > Off Topic > Which rifle is it?
Re: Tikka T3 recoil lug relief 49 months ago by Thomas Kitchen Re: Tikka T3 recoil lug relief

hi chris i haven't bedded a tikka but i think Nathan means the top and rear of the lug that touches the action the rest of the lug that does not touch the action will be bedded in the action completely without relief? please wait for someone that has done a tikka to answer this, i believe martin taylor has done a few please read his thread http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/17/thread/3925.html

Forum Index > Precision long range hunting and shooting > Tikka T3 recoil lug relief
Re: Where to next ?? 49 months ago by Chris Bayley Re: Where to next ??

Quote:Hi Chris, Welcome. Have you got Nathans series of Books? Worth every penny and the Knowledge contained combined with the web site will get you sorted if your happy to invest some time reading and learning? Cheers mate Yup, I certainly do and am enjoying every minute of them. I guess thats how I ended up here. I read them on Kindle and I have an App called 'VoiceDream' (sounds dodgy I know) which will read aloud an ebook while I drive to work - very useful for making the most of dead time. ..

Forum Index > Precision long range hunting and shooting > Where to next ??
Re: Photo Test 49 months ago by Nathan Foster Re: Photo Test

Bugger, looks like it won't let us access the image. I think its because there is a login before one can view the image as I tried to cut and paste to my browser but was asked to log in. Photo bucket can be a bit easier- apart from all the adverts. I will delete this thread. Feel free to start over if need be, its no trouble for me to remove these practice runs.

Forum Index > >
Re: Reloadilng for the 300 Savage 49 months ago by Thomas Kitchen Re: Reloadilng for the 300 Savage

hi randy. just having a read up on this thread what an interesting bit about the 150 interlocks anyway. two things springs to mind 1 did you change powder charge when you changed seating depths? your barrel harmonics will change so you'll need to workout your coal then do your load development from there. 2 what dies are you using? if your concentricity isn't good a bigger jump may cause problems

Forum Index > Rifles general discussion > Reloadilng for the 300 Savage
Re: Picking bullets for our needs 50 months ago by Nathan Foster Re: Picking bullets for our needs

Hi Brendon, if you want to go softer, yes, you can try the V-Max. I can see other good advice in this thread from bullet suggestions to 4 litre engines. As I have written in the KB, velocity is an important factor when using a small bore. So the first step is to make sure that your loads are up to full speeds. The second aspect is as talked about- shot placement, especially as we lose velocity. The HP Gameking is a good bullet in its own right. Be sure to study the actual wounding before you com..

Forum Index > Rifles general discussion > Picking bullets for our needs
Re: using a chrinograph 50 months ago by Warwick Marflitt Re: using a chrinograph

Heck! Talk about Big brother watching and tracking your every cyber move! Thanks for the reply. Again sorry for the thread hijack guys.

Forum Index > Rifles general discussion > using a chrinograph
Re: Last post gone 50 months ago by Nathan Foster Re: Last post gone

No, its me that has to apologize. As much as I like to try and nuture the info exchange on the site, I do have some aspects that I want to keep solely for customers and also, avoid any "why are you doing it that way" questions because only a part of the book info was relayed in a thread. I have some of the tipped 180gr VLD projectiles you made and sent me here, but have been shooting .338 exclusively of late. Am hoping to spend time over xmas with the Practical and give your modified projectiles..

Forum Index > >
Re: barrel shortning & suppersors 50 months ago by Nathan Foster Re: barrel shortning & suppersors

Hi Brendon, sorry, just playing catch up here as I have been busy with projects. Sorry also for missing your mail. OK, so you are at 3030fps with 2213sc. If you go to 20" and change to 2209, I think you will be able to work up to 3150-3200fps and have a good load. This barrel length should work OK and by being a bit shorter and fatter, it will be better regarding the potential muzzle thread diameter and the effects of trapped heat. So in conclusion, you should find that with load development, th..

Forum Index > Rifles general discussion > barrel shortning & suppersors
Re: barrel shortning & suppersors 50 months ago by Warwick Marflitt Re: barrel shortning & suppersors

Yeah Mike thanks for that. I researched and heard that B4 I ordered mine in 2010. Mine works great and he seamed good to deal with? I mean $110 for my suppressor compared to the moon beams others charge its only a tube with spacers and washers threaded at one end.... and like I said it works and his new stuff looks massive! But I didn't want a flash wank piece to show off!!!!! I just asked Rodge for a super quiet short out front over hang (150mm past barrel) suppressor and he gave me what I want..

Forum Index > Rifles general discussion > barrel shortning & suppersors
Re: barrel shortning & suppersors 50 months ago by Warwick Marflitt Re: barrel shortning & suppersors

I think its the quickest way to devalue a rifle! keep it standard length and get the end threaded and get one made like I got for my 22LR by Rev Rodge. SUB-SILENT SUPPRESSORS.......... Check them out here's Video of my 22LR https://www.youtube.com/watch?v=pRIKiK2msls http://sub-silentsuppressors.com/?page_id=8823 PRICES AND CONTACT. http://sub-silentsuppressors.com/?page_id=16079 Or you can use an engine oil filter!! I SHIT YOU NOT! SEE LINK BELOW. https://youtu.be/7t_pcWPdSDs?t=122

Forum Index > Rifles general discussion > barrel shortning & suppersors
Re: 270win /150 sst 50 months ago by Paul Yates Re: 270win /150 sst

Sorry to revive an old thread. I, too, am working on developing a load for .270win with the 150gr. SST. Based on the reloading data from various sources, I have decided to see what I can do with IMR-7828. I will begin with some reasonable loads and work up from there. My target, of course, is the recommended 2900fps. I am aware that getting that out of a 22" barrel will require me to be at or above max pressure, and I am not particularly confident about doing so. At listed max pressures, it seem..

Forum Index > Rifles general discussion > 270win /150 sst

ABOUT US

We are a small, family run business, based out of Taranaki, New Zealand, who specialize in cartridge research and testing, and rifle accurizing.

store