|You searched for: "thread"||731 total matches|
|98 months ago by Nathan Foster||Re: To Pillar bed or full length bed a rifle?
Hi Ryan, the short answer, is to utilize both full length and pillar bedding. Regarding pillar bedding, pillars are best utilized where there is a risk of stock compression over time. This is most apparent on on wood stocked rifles because the wood fibres can become crushed, resulting in a split stock. This occurs especially on older rifles where oils have continually run into the wood fibres but in contrast can also occur with dry, brittle stocks. In my own processes, I pillar bed wood stocked ..Forum Index > Rifles general discussion > To Pillar bed or full length bed a rifle?
|102 months ago by james hoskins||7mm mag powder choices
Hi I have been working up a 7mm mag 162gr amax load and have been using 2225, I see you suggest 2217 and 2213sc in another thread, I am currently achieving around .7moa accurracy which I want to improve on, should I be looking to move towards one of these 2 powders, is 2225 not the best choice?Forum Index > Precision long range hunting and shooting> 7mm mag powder choices
|103 months ago by Nathan Foster||Re: Actions
Hi Murray, yes, you are reading that right. However for the smith, its more a case of "I don't want to go down that road". The M700 is the easiest action for smiths to work with, both for machining and bedding. By easy, I don't mean this as a reflection of time factors or the skill levels of the smith, however skill levels are relative if the shop is employing apprentices. By easy, I mean that the receiver threads are usually cut in such a way that the factory barrels can be removed without the ..Forum Index > Rifles general discussion > Actions
|105 months ago by Nathan Foster||Re: Good starting platform??
Hi Jonathan. Of the rifles you have mentioned, the T3 and Rem SSPS are both good light weight rifles for the Alps. It really is up to you, which features you find the most desirable. As for the .270Win cartridge, most readily available factory loads in NZ feature a 130 grain bullet, many are very good. If you want to step things up further, for Thar and reds, a hand loaded 150 grain bullet is very emphatic for both close range and longer range work. Many people are currently facing tough financi..Forum Index > Rifles general discussion > Good starting platform??
|105 months ago by Nathan Foster||Re: 243 Win/ 95 Berger Test
Hi Jim, OK there are quite a few possibilities. I would like more info so if you can bare with me, we’ll get started. Regarding the bore: Have you tested other bullets in the Savage, if so, did they also produce fliers. If you have tested other bullets and accuracy was good, were the bullets flat based or with a vastly greater bearing area. How was the fouling, is there a complete lack of fouling when you look into the muzzle. When you look into the muzzle from 30-45 degrees, can you see circula..Forum Index > Rifles general discussion > 243 Win/ 95 Berger Test
|105 months ago by Nathan Foster||Re: 243 Win / 95 gr Berger
Hi Jim, I have posted a reply on the other .243/95gr VLD thread you started a few weeks back. Nathan.Forum Index > Rifles general discussion > 243 Win / 95 gr Berger