cart SHOPPING CART You have 0 items
SELECT CURRENCY

Discussion Forums

1
Search forums
Forum Index > Equipment > new knife steels

new knife steels

20 Nov 2026
@ 05:31 pm (GMT)

Warrick Edmonds

It's been a while since I posted, however thought you might like to know about a couple of new steels that have been released onto the custom knife making market. The guy behind Knife Steel Nerds, a website that delves into the technicalities of knife steels, Dr. Larrin Thomas, put his money where his mouth is and developed Magnacut in 2021. It was produced in colab with Crucible Steels in USA and was specifically designed to give increased toughness (chipping of cutting edge) and wear resistance (edge holding). Unfortunately the custom knife making world took a lot of convincing and by the time the steel was starting to gain traction Crucible went into liquidation and that was that. I managed to source some of the final batch of bar and made a knife for a moose hunter in Sweden. He got back to me, saying it's the best steel he's ever used by a long way. Thankfully, Erasteel acquired the Crucible assets and now produces Magnacut for the general market. It's a great steel and I'm adopting it as my standard for field knives. Further, in 2026, a new version called Magnamax was released. I've just finished making a blade from it and yet to field test it, so can only say, yes it's on the market.

Both of these steels are relatively expensive so don't expect bargains. Right now you're looking at $400 to $600 AUD per lineal meter for raw annealed flat bar. That will make three to four hunting knives.

If you want the full wrap on these steels you can go to Knife Steel Nerds website and there you'll find as much tech detail as you can handle.

Anyway, just making you aware of these new gen steels. From what I've experienced they seem very good.

Replies

1
21 Nov 2026
@ 06:13 am (GMT)

Nathan Foster

Re: new knife steels
Hi Warrick, to be honest, its nicer to read un update from you and to know that you are still enjoying your passion. I found that the sense of community among my readers was fractured after 2020 and more so after 2021. I lost contact with many of you thereafter. So again, great to hear that you are still at the the grind stone.

Sounds like these will be very good steels. 20 years ago one could obtain either good corrosion resistance or a good edge but not both. Incredible alloys these days but as you say, prices are now very high. Barrel steel has gone the same way, no advancements in alloy but very high high prices.

Wishing you all the best.
1
 

ABOUT US

We are a small, family run business, based out of Taranaki, New Zealand, who specialize in cartridge research and testing, and rifle accurizing.

store