|
|
|
Discussion Forums
Forum Index
> Optics
> Nathan, a few questions
Nathan, a few questions
@ 07:52 pm (GMT) |
Craig HenardI picked up a used Rem ADL 7mm Magnum and I am going to put Burris Signatures on it with a Leupold 4-12 VX1x40 with long range duplex .I am wanting to deer hunt with a range out to 700 yards. Would you recomend the Burris Zee signatures with Weaver style 2 piece bases(Steel or Aluminum??) Or the Burris Signatures with dual dovetail Bases(Leupold) ? Thanks Craig |
Replies
@ 07:32 pm (GMT) |
Nathan FosterRe: Nathan, a few questionsI prefer the weaver style bases or rails, steel or ali- both are fine. These days, the only time I use windage adjustable bases is if I discover serious misalignment of the scope base holes in the action effecting windage adjustments. |
|
@ 02:56 am (GMT) |
Craig HenardRe: Nathan, a few questionsThanks Nathan.I just didn,t know if it was okay to use the Steel Burris rings with the Aluminum Weaver bases. Nathan I was referring to the Dual Dovetail Bases and not the Windage adjustable bases . Curious as to whether you thought the Dual Dovetail was a stronger system ,more rugged, than the Weaver type System. Thanks again Craig |
|
@ 05:42 pm (GMT) |
Nathan FosterRe: Nathan, a few questionsIt is hard to say whether one system is stronger that the other. I can state that if the rings are removed often, the dovetails can lose a degree of integrity with wear. Few people make such changes though.The weaver type system I mentioned is very basic and very strong. It is a very simple system and will allow you to remove and refit your scope if need be, without having to disassemble the rings. |
|
@ 01:28 pm (GMT) |
Craig HenardRe: Nathan, a few questionsThanks NathanI will be ordering Burris Signature Zee rings then. Regards ,Craig |
Please wait
ABOUT USWe are a small, family run business, based out of Taranaki, New Zealand, who specialize in cartridge research and testing, and rifle accurizing.
|
KNOWLEDGEBASE |
KNOWLEDGEBASE |