|
|
|
Discussion Forums
Forum Index
> Rifles general discussion
> Re: P-14 found in the bottom drawer
Re: P-14 found in the bottom drawer
@ 06:35 am (GMT) |
Paul LevermanThomas - re-reading your first response, and you mentioned that the barrel tenon was a problem in regards to the blank diameter. Do you have the diameter of your action threads? Mine measure out to the point where a standard 1.240" barrel will do just fine. I may be a little bit out on the numbers, but by calculation it seems that they are 1.125" X 10TPI, square threads. |
Replies
No replies have been posted yet
Please wait
ABOUT USWe are a small, family run business, based out of Taranaki, New Zealand, who specialize in cartridge research and testing, and rifle accurizing.
|
KNOWLEDGEBASE |
KNOWLEDGEBASE |