Discussion Forums

Scott Struif

This new video posted by an old timer who dabbled with necking the 300WM down to 7mm is interesting because he was inspired to do it for the main reason that inspired Nathan to develop the 7mm Practical, . . . Improve on the 7mmRM to get the most out of the 7mm. Nathan refined the idea to produce a viable wildcat with tooling commercially available from a U.S. reamer manufacturer. The guy must must be living under a rock to be unaware of it.

https://youtu.be/8Df4965s-5A?si=aCxylxwnpwgBV57b