cart SHOPPING CART You have 0 items
SELECT CURRENCY

Discussion Forums

1
Search forums
Forum Index > Rifles general discussion > VZ24 options in build

VZ24 options in build

28 Apr 2020
@ 06:17 am (GMT)

Randy Leunissen

All,
I have a VZ24 action that has been in my basement for quite awhile and it is time to give it a new role in life..

I have been thinking of a 35 Whelen build, but my concern is magazine well length. COAL for 30-06 & family is a book length of 3.340". My reloads are typically longer in my 06 (usually find max and back off 20 thou or so). I know the Whelen will mostly use shorter bullets (such as 250 RN) and high BC bullets not as typical. My concern being the original 8MM COAL is 3.250"and I fear I will have issues with COAL for my loads if I go this route. Anyone have any experience or input with M98 builds using longer cartridges? Will aftermarket market mag well or will altercations be required to original mag well?

Thanks Randy

Replies

1
28 Apr 2020
@ 10:05 am (GMT)

Nathan Foster

Re: VZ24 options in build
Hi Randy, there are minor differences in some of these magazines to the tune of 80 thou. Could you please get a caliper reading of the exact internal mag length so that I can advise.
28 Apr 2020
@ 11:54 pm (GMT)

Randy Leunissen

Re: VZ24 options in build
Hello Nathan,
I measure 3.300". Measured from bottom (trigger guard side). Took multiple readings 3.299.5 to 3.307". I also measured a 30-06 reload that I use in my M700 bdl-dm. It was a 180grain fail safe and measured 3.355". This round clearly would not feed in this well.

Thank you sir.
Randy
30 Apr 2020
@ 02:45 pm (GMT)

Nathan Foster

Re: VZ24 options in build
Hi Randy, I made up a video response, hope it helps:

https://youtu.be/qyrmBhaqXtM
1
 

ABOUT US

We are a small, family run business, based out of Taranaki, New Zealand, who specialize in cartridge research and testing, and rifle accurizing.

store