|
|
|
Discussion Forums
Forum Index
> Rifles general discussion
> Re: Tikka T3 chamber variations in 6.5x55
Re: Tikka T3 chamber variations in 6.5x55
@ 04:04 pm (GMT) |
Paul LevermanIt might be an idea to get your chambers casted to find out what is going on. Assuming that your press has the standard 7/8-14 UNC threads, and that it is a half turn adjustment to get them to chamber, this means there is a difference in length of about 0.036" (7/8-14 UNC = 14TPI, 1/14 = 0.071" per turn, 1/2 turn = 0.0357"). To me that would raise some concerns. |
Replies
No replies have been posted yet
Please wait
ABOUT USWe are a small, family run business, based out of Taranaki, New Zealand, who specialize in cartridge research and testing, and rifle accurizing.
|
KNOWLEDGEBASE |
KNOWLEDGEBASE |