cart SHOPPING CART You have 0 items
SELECT CURRENCY

Discussion Forums

Search forums
Forum Index > Search Results
You searched for: "thread" 709 total matches
Re: rifle wont shoot less than 1 1/4 inch 58 months ago by Mike Neeson Re: rifle wont shoot less than 1 1/4 inch

Hi Jaspur, start here. http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/17/thread/4765.html [http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/17/thread/4765.html] In this thread there is another link to more detailed info on working up a load. Good luck.

Forum Index > Rifles general discussion > rifle wont shoot less than 1 1/4 inch
Re: rifle wont shoot less than 1 1/4 inch 58 months ago by Nathan Foster Re: rifle wont shoot less than 1 1/4 inch

Hi Jaspur, this may simply be a case of your COAL being wrong. You are cuurently set too long and concentricty will be very poor. Set COAL to 71mm, then rework up loads. See COAL article in the rifle accuracy section of this site for more info as to why your COAL was wrong at 1 thou jump in the .308. There should be another thread here somewhere close which covers the same info and also powder charges. Bedding may need addressing, plus other factors as described in my last book (Accurizing). Sti..

Forum Index > Rifles general discussion > rifle wont shoot less than 1 1/4 inch
Re: Weatherby Vanguard 300WSM 58 months ago by Andrew Dobbin Re: Weatherby Vanguard 300WSM

Finally got time to post an update for those interested. I finished bedding about 2 weeks ago, came out real nice with just a couple of cosmetic cracks at the tang. I ended up putting a Timney trigger in because when I adjusted the factory trigger to 1.5lbs the trigger weight screw was only engaging about 1.5 threads, and this just didn't feel safe to me. Bonus that the Timney has a 3 position saftey opposed to the original 2 on the factory. [http://s40.photobucket.com/user/nakidobbo/media/phot..

Forum Index > Rifles general discussion > Weatherby Vanguard 300WSM
Re: Open sights 58 months ago by Randal Graham Re: Open sights

Browsing through the forum and came across this thread, thought I'd jump in as iron sight hunting has been my passion since the beginning of my hunting some 36 years now. I have had glassed rifles, particularly for coyotes, but most often use iron. My first great setup was on a BLR in .30-06, front sight was the factory post with a hood added and what I came up with was a small platinum shotgun bead. On the rear the first really good one was a lyman #90 .22 target sight, it has finger adjustable..

Forum Index > Rifles general discussion > Open sights
Re: Tikka T3 build/bedding 58 months ago by Paul Horwath Re: Tikka T3 build/bedding

Here's what I've done to prepare the pillars and the recoil lug for bedding my Tikka T3 action thus far. I've screwed the pillars to the action using a tapered head screw. On the threads of the tapered screw, I wrapped the threads with electrical tape to a diameter that fit the inner ID of the aluminum pillars. The tapered head centers the pillar at the top, and the electrical tap centers the pillar where it mates to the face of the action. Then I placed a tall socket on the top of the pillar th..

Forum Index > Rifles general discussion > Tikka T3 build/bedding
Re: Tikka T3 build/bedding 58 months ago by Paul Horwath Re: Tikka T3 build/bedding

Quote:Hi Paul If you look at Bens picture above you can see the pillars protruding from the stock that will fit up flush against the washers located in the plastic trigger guard. I have done similar is the Boyd's stock but have used a machined feral that fits into the plastic guard then bedded them into the stock, l also machined flat seat rather than tapered action screws. The problem lies with the original tapered screws pulling into and possibly through the unsupported thin washers in the gua..

Forum Index > Rifles general discussion > Tikka T3 build/bedding
Re: Stock Recommendation 59 months ago by thomas kitchen Re: Stock Recommendation

hi scott this subject comes up a lot its worth searching the old threads for a read. hope you find something that suits you (and your budget). and be sure to post a picture of what you decide on.

Forum Index > Rifles general discussion > Stock Recommendation
Re: Unburnt powder in the moderator 59 months ago by chris murphy Re: Unburnt powder in the moderator

Welcome GB it is simply that the barrel is to short for the amount of powder in the case to fully burn. Make sure he cleans it out regularly or he might end up with a pipe bomb threaded on his barrel

Forum Index > Rifles general discussion > Unburnt powder in the moderator
Re: Tikka T3 build/bedding 59 months ago by G B Re: Tikka T3 build/bedding

Good morning gentlemen. I have been following several threads on here with interest and a comment Nathan made above has prompted me to join up and - where possible - join in. In the comment above Nathan refers to a discussion about double set triggers, now as this is a small obsession of mine I would be very grateful if someone could point me to that discussion. Meanwhile I will be considering further some of the discussion surrounding stock bedding. My interests are vintage and out of productio..

Forum Index > Rifles general discussion > Tikka T3 build/bedding
Re: Remington 700 Sendero Barrel, Chambered in 7mm RM and threaded - 200rds use 59 months ago by Adrian Van Haeren Re: Remington 700 Sendero Barrel, Chambered in 7mm RM and threaded - 200rds use

Id bee keen also

Forum Index > Classifieds, for sale section > Remington 700 Sendero Barrel, Chambered in 7mm RM and threaded - 200rds use
Re: Brass preparation for LRHunting (and DIES selection) 59 months ago by Alvaro Piqueras Alonso-Lamberti Re: Brass preparation for LRHunting (and DIES selection)

Hi all; Old thread, but iīm going slow, step by step. Someone have noticed I have had many problems with my sendero. Things start to go well, but you canīt relax too much! The other day i was reloading some rounds. During F-L process, i get a bit distracted, and a case mouth traps the decapping needle, bending the threaded rod (hornady die: it has a threaded rod where you screw the expander and the decapping needle). I just raise the handle and start again, after checking the case mouth. I didnī..

Forum Index > Precision long range hunting and shooting > Brass preparation for LRHunting (and DIES selection)
Re: loading .308 Winchester with the Hornady 168 grain A-Max 59 months ago by Mike Neeson Re: loading .308 Winchester with the Hornady 168 grain A-Max

Hi Bryan, see thread below. http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/18/thread/4756.html [http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/18/thread/4756.html] Mike

Forum Index > Rifles general discussion > loading .308 Winchester with the Hornady 168 grain A-Max
Re: new brass 59 months ago by Ronald Le May Re: new brass

Just a quick one I have discovered that NORMA brass has a rim thicker than the Lapua brass I use in this case the rims are 140 thou. So you should adjust your NK, FLS and Seating dies for this fact. It seems a bit harder than the Lapua brass as well I am triming mine to 2.161 for a 3.1410 COAL with BERGER 140VLD in 6.5 x 284. One point often overlooked by some as not that important is the primer pocket and the internal of the flashole. Standard practice for me with new brass is to uniform the po..

Forum Index > Rifles general discussion > new brass
Re: concentricity tool 59 months ago by Rob Hughes-Games Re: concentricity tool

for a stand get a rod with a thread on the bottom. then a piece or steel or aluminium and drill two holes in it. one the size of the rod and the other the size of the dti stem area. drill a little hole at 90 degrees to each of these screws and use them for set screws to hold everything together. http://www.sinclairintl.com/reloading-equipment/measuring-tools/concentricity-gauges/sinclair-concentricity-gauge-prod37479.aspx

Forum Index > Precision long range hunting and shooting > concentricity tool
Re: Nathan and others ,Finally got a chance to shoot new Remington 700 stainless long range rifle,extreemly dissapointed !! 59 months ago by Craig Henard Re: Nathan and others ,Finally got a chance to shoot new Remington 700 stainless long range rifle,extreemly dissapointed !!

I just got through sliding the scope(left tightened in rings) from the rifle to check the length of the front scope base screw and I had put Loctite blue 242 on the scope base screws and the crossbolt screws of the Burris Signature bases and rings. Do I need to remove any of the loctite from the screw threads and thread holes before reusing and if so how to remove? Also I just remove the front screw from the front base,can I just put the screw back in the base and torque to specs of do I need to..

Forum Index > Rifles general discussion > Nathan and others ,Finally got a chance to shoot new Remington 700 stainless long range rifle,extreemly dissapointed !!
Re: 25-06 Rem twist rate for 117gr projectiles 59 months ago by thomas kitchen Re: 25-06 Rem twist rate for 117gr projectiles

hi ben sounds like what i wanted to hear. was planning on using timney trigger and boyd stock rebarrelling in 308 norma magnum using a match grade trueflight barrel when funds allow it. just doing practice bed in original stock now if your interested theres a thread on it called "p14 project"

Forum Index > Rifles general discussion > 25-06 Rem twist rate for 117gr projectiles
Re: 25-06 Rem twist rate for 117gr projectiles 59 months ago by Nathan Foster Re: 25-06 Rem twist rate for 117gr projectiles

I think that's a really good idea Ben- 26", then cut down to 24" later if you don't like it. Having said the above, the suppressor might make this a bit of an issue. You would want some meat at 26" before thread cutting. Can be a lot easier at 24". So you need to decide on whether you really want to fit the suppressor or experiment with the longer barrel, or fit a barrel with a bit of heft to it (e.g. True-Flite #2 contour barrel, specifically contoured to suit M14 thread at 26"). Just bear in m..

Forum Index > Rifles general discussion > 25-06 Rem twist rate for 117gr projectiles
Re: 25-06 Rem twist rate for 117gr projectiles 59 months ago by Ben Grady Re: 25-06 Rem twist rate for 117gr projectiles

Thanks Nathan, 10" may be the safer bet for a 25-06 Rem. What about barrel length? 24" or 26"? Get a 26" and cut down later if it is annoying. Will I get anything more from a 26" length than a 24" for this calibre. A lot of internet thread reading says 24" minimum but 26" is better as the 25-06 is overbore. I will probably get it threaded for a suppressor as I have a 25cal suppressor already on my .303-25. cheers Ben

Forum Index > Rifles general discussion > 25-06 Rem twist rate for 117gr projectiles
Re: new brass 59 months ago by Ronald Le May Re: new brass

Hi Thomas & Nathan You can neck size if using the brass in the same rifle but after a while you may find the case grows in length which requires the case to be trimmed and FLS'ed.(Bump the shoulder back) I usually FLS every 3rd firing in my 6.5/284 and trim every reloading. The secret to extended case life is to work up a load that gives the performance you require without running it hot, though in saying this Magnum cartridges do have a lower limit which it is advised not to load below. Whether..

Forum Index > Rifles general discussion > new brass
Re: 59 months ago by Mike Neeson Re: "Upgrade" from 300 WSM to 7MM Rem Mag??

Exactly right, no point having a howitzer and being stuck in the one spot! Ric have a read of this thread http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/17/thread/4297.html [http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/17/thread/4297.html] It might help you out.

Forum Index > Rifles general discussion > "Upgrade" from 300 WSM to 7MM Rem Mag??
Re: concentricity tool 60 months ago by Rob Hughes-Games Re: concentricity tool

get a piece of guage plate.(ground plate). 4 ball bearings around 1cm and a bolt (5cm) and 2 nuts. drill 4 holes in the plate so the ball bearings are almost touching. solder or epoxy them in to the holes. drill a hole between them at the end for the bolt. either drill and tap it or but a nut on each side of the plate. that bolt will be the backstop for the case. ideally the bolt is non threaded where the case rubs and is square. then either make a stand for the DTI or use a magnetic stand. I do..

Forum Index > Precision long range hunting and shooting > concentricity tool
Re: Bedding a 1917 Enfield in 30-06 (Mauser Action) 60 months ago by thomas kitchen Re: Bedding a 1917 Enfield in 30-06 (Mauser Action)

hi don received by p14 back today its got a weaver 46 mount on front of reciever and weaver 55 at rear ill upload some photos to the project p14 thread when i get a chance. hope its been some help

Forum Index > Rifles general discussion > Bedding a 1917 Enfield in 30-06 (Mauser Action)
Re: Rem 700 sendero bolt (problems?) 60 months ago by Alvaro Piqueras Alonso-Lamberti Re: Rem 700 sendero bolt (problems?)

Hi all; Let me update this thread, FWIW. The rifle is performing, at least, well. I have put plenty of work in the rifle, following Nathanīs books. It has been bedded with Matchgrade bedding compound, lugs lapped, optics fit, barrel mantained as best as I can. Get some H4831sc, a bit fast, but it was the best I can get. Pushing 208 amax at 2870fps. I can improve my reloads a bit, just waiting to get some extra stuff. I have a pair of questions, in order to end the set up of the rifle, until I ca..

Forum Index > Rifles general discussion > Rem 700 sendero bolt (problems?)
Re: Recoil 60 months ago by thomas kitchen Re: Recoil

hopefully nathan along to help soon. but one that push's recoil straight back into shooter / stock that is inline with the barrel etc. if you have a look at the wood stock thread you'll see that one of the bell and carlson design comes up, might be worth look at. there also a thread called recoil reducers and stock design gets mentioned in there, hope it helps

Forum Index > Rifles general discussion > Recoil
Re: Is more better? 60 months ago by sllindsay Re: Is more better?

I am just catching up on this thread. In reply to the question about copper fouling with TSX and TTSX bullets, I have been shooting them a lot in my 308 (130gr at 3000fps) for about a year and a half. I don't find they build up copper and worse than lead-core bullets in the same rifle. I have several rifles that are terrible with regular ammunition, so I know what bad fouling is like, but I have not had a problem with their use in the 308. sl

Forum Index > Rifles general discussion > Is more better?

ABOUT US

We are a small, family run business, based out of Taranaki, New Zealand, who specialize in cartridge research and testing, and rifle accurizing.

store