cart SHOPPING CART You have 0 items
SELECT CURRENCY

Discussion Forums

Search forums
Forum Index > Search Results
You searched for: "thread" 709 total matches
Re: 30-06 or? 37 months ago by Nathan Foster Re: 30-06 or?

The good old internet, the place to go for completely unqualified opinions. I deal with .30-06 rifles on a week to week basis and love this caliber. The rifle in the tips and tricks video for example shoots through one small hole. The rifle in the M700 stainless forum thread is shooting into .3". The statement you made (from the internet info), would be better qualified if someone had said- a .308 with a match bullet leade angle will be more inherently accurate for long range than a .30-06 with ..

Forum Index > Precision long range hunting and shooting > 30-06 or?
Re: Bedding Rimfires 37 months ago by Bryan Webster Re: Bedding Rimfires

Here is a link that may help as well, as there are photos etc. in it. Link to thread contain information on pillar bedding a 452 Varmint by DrGunner. http://www.rimfirecentral.com/forums...d.php?t=553469 Link to thread on pillar bedding a 452 Silhouette. http://www.rimfirecentral.com/forums...d.php?t=553471

Forum Index > Rifles general discussion > Bedding Rimfires
Re: home made tumbler 38 months ago by Paul Leverman Re: home made tumbler

Thomas, it's your thread. But I think we should see what every body else has come up with as well. Are you good with that? Nice job on the tumbler. I really don't like cleaning brass, but the tumbler takes forever, and I can do a bunch of brass in an hour. But I really don't like cleaning brass, but I don't like waiting even more.

Forum Index > Equipment > home made tumbler
Rifle Bedding Magpul's Hunter 700 Stock 38 months ago by Just Send It Rifle Bedding Magpul's Hunter 700 Stock

Hello all, I'm new to this site and can't find where to start a new thread so I'm gonna try posting here. I have purchased a Magpul 700 hunter stock for my Remington 700 SA SPS AAC. I read on this site that I need to add a stabilizing agent to a synthetic stock before I bed it. BUT, the inside of the stock already has an aluminum lining. My questions are: Do I need to try and remove the aluminum lining, add the stabilizing agent, put the lining back in, and then bed it? or Do I just need to skip..

Forum Index > Rifles general discussion > Rifle bedding SPS stock, help please
Re: Stocky's new LR Rem Composite Stock??? 38 months ago by Tyson Swimley Re: Stocky's new LR Rem Composite Stock???

This is a bit of an old post but I own one and love it. I posted a review at The High Road: http://www.thehighroad.org/showthread.php?t=804496 [http://www.thehighroad.org/showthread.php?t=804496] Hope that helps!

Forum Index > Precision long range hunting and shooting > Stocky's new LR Rem Composite Stock???
Re: new AR for nz defence force 38 months ago by Cor Nepgen Re: new AR for nz defence force

Hi All, Warwick, I really thought you had a point until you go and say Rage Against the Machine is just noisy screaming.. Now I don't know if I can trust anything you say anymore! (Also have a look at "Township Rebellion" Jokes aside, you have a point especially regarding war only serving to enrich the few. I unfortunately have grown somewhat sceptical of the masses growing tired and overthrowing the leaders if what little they have gets taken away from them. I don't know if you guys are familia..

Forum Index > Off Topic > new AR for nz defence force
Re: new AR for nz defence force 38 months ago by Warwick Marflitt Re: new AR for nz defence force

Hey Mike thanks for the input. The United States didn't sign The Hague Convention of 1899? How much copper do you save from making a million hollow vs solid point? The Accountants have been fiddling the figures! So can you get an exemption from Wars and suffering? Maybe swap them for some Peace, fellowship and understanding? It's really important to kill game quickly and humanly and good bullet design is paramount to achieve that. A good bullet for war would be no bullet! You should be arrested ..

Forum Index > Off Topic > new AR for nz defence force
New rifle before first shot 38 months ago by jason New rifle before first shot

Just thought I'd start this thread as a reminder or a help to new shooters. I have just brought a new rifle. A tikka. I always knew I should clean a bore before the first shot to remove any protective oils. Also not long before this rifle I brought a borescope too. I had always wanted one and took advise from someone who has one over those that don't seriously. (I'm not an expert though but am calling what I see) So I look down the bore first off. There is not much signs of test firing or protec..

Forum Index > Rifles general discussion> New rifle before first shot
Re: Light .270 loads - Which projectile? 38 months ago by Warwick Marflitt Re: Light .270 loads - Which projectile?

It sucks when Customs x-rays the rifle and says what's the liquid in the stock? And then the fun starts! Tungsten is heavier than mercury by almost half as much again so a smaller piece weights the same, And tungsten won't destroy aeroplanes aluminium body like good old mercury has done so in the past. (If it leaked) Just thought it (tungsten) was an easy way to get the best results. The ultimate is Osmium at 22.6kg/litre! mercury is 13.5kg/ litre and tungsten is 19.6 kg per litre. Sorry for hij..

Forum Index > Rifles general discussion > Light .270 loads - Which projectile?
Re: Light .270 loads - Which projectile? 38 months ago by Bryan Webster Re: Light .270 loads - Which projectile?

Warwick, I understand the reticence re mercury. Some I have used were installed in HS Precision stocks on lighter weight 300 Win Mags which were also threaded for muzzle breaks and fitted with the Limbsaver butt pad. Recoil shooting hot loads of 208 grain A-Max were actually very comfortable to shoot. They are pretty darned safe, in metal tubes - not for their weight but under recoil the movement of the mercury minimizes felt recoil effectively. Each to one's own preferences of course, but I enj..

Forum Index > Rifles general discussion > Light .270 loads - Which projectile?
Re: Light .270 loads - Which projectile? 38 months ago by Bryan Webster Re: Light .270 loads - Which projectile?

You are right about the 150 gr .270 being fine for moose. They are not hard to take down given good shot placement and penetration is optimal. That was the main reason I mentioned the Nosler Accubond as they do the job well. I also think the Nosler Partitions or the Speer Hotcor bullet, all would do well. Practice loads could be light weight bullets that shoot well in your rifle, and I do like the idea of adding a tiny bit of weight - but that being said, you mentioned the butt stock being hollo..

Forum Index > Rifles general discussion > Light .270 loads - Which projectile?
30-caliber-bullet-test-as-well-as-a-few-others (Chinchaga Bullets) 39 months ago by stephan bieganek 30-caliber-bullet-test-as-well-as-a-few-others (Chinchaga Bullets)

Check out the results of some bullet testing done by "whelen nut". The results from the .308 195gr Chinchaga bullet is outstanding. http://www.thestalkingdirectory.co.uk/showthread.php/110357-30-caliber-bullet-test-as-well-as-a-few-others

Forum Index > Precision long range hunting and shooting> 30-caliber-bullet-test-as-well-as-a-few-others (Chinchaga Bullets)
Re: Remington stocks 39 months ago by Thomas Kitchen Re: Remington stocks

hi Greg the company name that makes apex is precision platforms ltd https://www.facebook.com/precisionplatforms/ http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/17/thread/8265.html

Forum Index > Rifles general discussion > Remington stocks
Re: Knife 39 months ago by Dan Keene Re: Knife

This is a great thread guys. I have learned a lot. Thank you. I have learned that my hunting knife could be made of better steel as it is plain old 440A. It sharpens up OK but could hold that edge longer. So, Warrick can you please advise me over which steel? I have been looking at 1096 Cro-Van (Kabar) or 440HC. I would value your opinion, thank you. Cheers,Dan.

Forum Index > Equipment > Knife
Re: .30-06 bullet weight and barrel length 39 months ago by Warwick Marflitt Re: .30-06 bullet weight and barrel length

There comes a point in some debates where you just have to let people be wrong? I recall an event where a Helicopter was being used to drag a 110 meter length of fire hose to replace the broken town water supply pipe as the Bridge had been washed away in a cyclone. The gap was 110 meters wide. Two Firemen in the brigade commented to the officers in charge that the hose wouldn't be long enough and where told to mind their own business. they wouldn't and stated that it wont work the hose is too sh..

Forum Index > Rifles general discussion > .30-06 bullet weight and barrel length
Re: .30-06 bullet weight and barrel length 39 months ago by Sebastian Shand Re: .30-06 bullet weight and barrel length

i was browsing trade me yesterday and came a across a tikka t3 lite 300 win mag thats been cut to 17inches and suppressed. its enough to make a grown man cry. anyway sorry to hijack the thread. i hope you get it all sorted Euan good luck!

Forum Index > Rifles general discussion > .30-06 bullet weight and barrel length
Re: Knife 39 months ago by Nathan Foster Re: Knife

I have been meaning to email you Warrick but this thread will do fine. Wanted to say, I have been finding that the knives / this steel seems to be getting better with age. And by this I don't mean finding the right angle because I have not changed anything. In the DRT vid I put up, it had been three trips since I sharpened the knife. During that time, I have butchered deer, muddy goats and pigs and sheep. Have only used a sheffield steel to correct the big knife over a total of about fifteen ani..

Forum Index > Equipment > Knife
Re: .30-06 bullet weight and barrel length 39 months ago by Euan Simpson Re: .30-06 bullet weight and barrel length

Thanks again for the thoughtful advice - particularly Nathan for sharing his experience freely. I agree with most of what was said about people liking to 'mod' their guns for fun rather than to address any real problems. I have been as guilty of that as anyone. But this is a rifle that cost me $100. It came with a cracked stock, spray painted barrel and action, and rust. With the cost of the bedding kit and threading the whole thing owes me less than $300. It wears a 20 yr old 4 power scope in 2..

Forum Index > Rifles general discussion > .30-06 bullet weight and barrel length
Re: .30-06 bullet weight and barrel length 39 months ago by Thomas Kitchen Re: .30-06 bullet weight and barrel length

hi Euan. one thing i thought i would ask is why did you get it suppressed in the first place? if its for no particular reason you could just hunt without it. one option is to look at the cost of cutting down a barrel $100? then look at what your rifle worth, if you want a short handy rifle is it worth thinking about trading it in on a 20inch 308? is just an idea some rifles come pre threaded so same suppressor should fit but will need a different bush.

Forum Index > Rifles general discussion > .30-06 bullet weight and barrel length
280 Rem in Winchester M70 40 months ago by Grant Lovelock 280 Rem in Winchester M70

For sale: Winchester M70 long action in 280Rem Trueflite barrel, had about 200 rounds through it.... on deer and pigs out to 570 yards neck shot Stock is unique as this Hungarian owner has hand carved oak leaves near the butt pad, and it has a wooden carved deer hoof on the bottom of the pistol grip.... Custom chequering, and ebony tip on fore-end. Stock also Pillar bedded by me at TF. Action and barrel has been KG Gunkoted, barrel coating shows a little wear due to the suppressor( suppressor no..

Forum Index > Classifieds, for sale section> 280 Rem in Winchester M70
Re: What scope for a 375 H&H Magnum??? 40 months ago by Thomas Kitchen Re: What scope for a 375 H&H Magnum???

Hi Shane. we can look at this in to ways you could get a small light scope to keep it handy or you could get a heavier scope to try and help tame some recoil. what ranges will you be hunting? there's a conversation going on under the optics section that might be worth a read. http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/21/thread/10923.html you might find one of the sightron s tac's might serve your purpose 1-7x24 2-10x32 or jump up to the 3-16x42

Forum Index > Rifles general discussion > What scope for a 375 H&H Magnum???
Re: The wonderful 35 cal 40 months ago by Thomas Kitchen Re: The wonderful 35 cal

hi Bryan and Bob i have been reading this thread its very interesting i can't as much as my 35/303 still in the works. as Nathan mention at the start we have been chatting about few things around the 357 mag mainly, its been educational to say the least. ill let Nathan upload his research before i comment on it. when i first talked to Nathan about building a 35/303 i had done some trial dummy rounds with 250gr hotcors. Nathan suggested that i look mainly at the 225gr game kings as the projectile..

Forum Index > Rifles general discussion > The wonderful 35 cal
Re: Tikka T3 GRS Laminate bedding 40 months ago by Tikka Masala Re: Tikka T3 GRS Laminate bedding

Thanks Martin. Today I got: Nitto tape from Jaycar $3.50 M6 threaded rod (1m) $1.70 Just need the brush and the glue. So just a drop of superglue will do the trick?

Forum Index > Rifles general discussion > Tikka T3 GRS Laminate bedding
Re:  Which sightron 40 months ago by Warwick Marflitt Re: Which sightron

Hi Mal. Check out my thread if you want too? I imported mine from USA . I got a 25133 Sightron from 4Scopes. It's a fantastic bit of kit. Here's the info page for it http://www.deadeyedicks.co.nz/cms/pages/details/sightron-siii-6-24-x-50-lr-md-1230.php This is my thread link. http://www.ballisticstudies.com/Resources/Discussion+Forums/x_forum/21/thread/5640.html

Forum Index > Optics > Which sightron
Re: Tikka T3 GRS Laminate bedding 40 months ago by Tikka Masala Re: Tikka T3 GRS Laminate bedding

Graphite powder from repco, aluminium tape from bunnings, other stuff from anywhere. Now just need a squared-off knife, some old inner-tubes, some suitable thread-stock, some glue to temporarily secure recoil lug, and to find a nice soft makeup brush. What glue is ok for the recoil lug? Should it be an epoxy instead of a CA, and only 1 drop will do it right! right? Next post will be in 10 days or so. Hopefully curing! :)

Forum Index > Rifles general discussion > Tikka T3 GRS Laminate bedding

ABOUT US

We are a small, family run business, based out of Taranaki, New Zealand, who specialize in cartridge research and testing, and rifle accurizing.

store